REMOTE SENSING FOREST BIOMASS: AN EVALUATION USING HIGH RESOLUTION REMOTE SENSOR DATA AND LOBLOLLY PINE PLOTS     

John R. Jensen  Michael E. Hodgson 《The Professional geographer》1985,37(1):46-56

Eight-year-old Loblolly pine (Pinus taeda) plots located in South Carolina were evaluated using high resolution aircraft multispectral scanner data to determine if biomass could be accurately measured. Sixteen pine plots located on both sandy and clay soils were treated with 0, 180, or 360 kg. (approximately 0, 400, or 800 lb.) of nitrogen per plot. Indices of biomass from remote sensing data were significantly correlated with in situ biomass measurements made in each plot. A ratio of infrared (.9–1.1 μm) and red (.65–.70 μm) channels yielded the best correlation. The indices were not sensitive to differences in soil type (sandy or clay).  相似文献   

天王星卫星位置可视化软件设计     

訾丽萍 《时间频率学报》2002,25(1):64-69

为了满足大行星卫星的高精度CCD位置观测与运动理论研究工作的需要 ,采用天王星 5颗主要卫星摄动理论模型 (Gust86 )作为核心 ,设计了一个天王星视位置可视化软件。该软件具有卫星证认 ,最佳观测时段选取 ,精确模拟卫星视运动和实时引导CCD精密定位观测等功能。  相似文献   

On least squares estimation of generalized covariance functions     

Angelika van der Linde 《Mathematical Geology》1993,25(1):1-7

Least squares estimation (LSE) is theoretically related to quadratic unbiased estimation of variance components. It is argued that these methods of estimation of variance components essentially generalize LSE though they are not formally equivalent.  相似文献   

变形分析的Bayes估计与检验     

寇新建 《大地测量与地球动力学》1994,(3)

由于观测条件的变化，观测值方差将产生随机波动。本文根据Ｂａｙｅｓ估计理论，推导了线性模型待估参数的分布函数及观测值方差估计公式，并将其用于位移检验。计算结果表明，在同样的置信度下，本方法更符合实际。文中还对参数估值的统计性质进行了讨论。  相似文献   

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms     

G. Palladino  A. Basili  G. Di Cocco  T. Franceschini  G. Landini  S. Silvestri  A. Barbini  M. Galimberti  L. A. Gizzi 《Experimental Astronomy》2006,21(3):169-187

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.  相似文献   

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)     

Andrzej Leniak  Grzegorz Pszczo&#x;a 《Tectonophysics》2008,456(1-2):16

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.  相似文献   

基于群桩基础沉降估算确定压缩层厚度的探讨     

宁文务 《探矿工程》2008,35(8):44-46

在现行规范中,由于桩基沉降估算模式的不同,压缩层厚度的确定方法也不完全相同。对这些方法进行归纳、总结,并通过具体的工程实例,对由不同估算模式确定的压缩层厚度及沉降估算结果进行探讨与分析,认为对于工程场地地质资料掌握较为翔实的情况下,压缩层厚度可采用变形比法确定,否则,宜根据应力比法确定。  相似文献   

海水叶绿素α浓度遥感测量的实验研究     

张绪琴  傅克忖  牟敦彩 《海洋科学进展》1992,(1)

本文描述了1989年11月在青岛即墨岙山养殖基地所做的海水叶绿素σ浓度遥感测量的基础实验。该实验获得了高浓度叶绿素α含量的海水反射光谱。该反射光谱的特征波段为:波谷在485nm;波峰在450nm 和535nm;“节点”在572nm.根据该实验数据选取了叶绿素α浓度两种双波段估算模式.分析结果表明;两种模式的精度都在50%以上,且双波段反射率的差值法优于双波段反射率比值法.  相似文献   

起算点精度对GPS基线解算质量的影响   总被引：1，自引：0，他引：1  

谢劭峰  王新桥 《海洋测绘》2006,26(6):22-24

基线处理时要求知道一个点的坐标,其精度对GPS基线的解算结果有影响。采用实测数据研究起算点精度对GPS基线解算质量的影响,得出了其影响规律,同时给出了提高起算点精度的方法。  相似文献   

基于MATLAB的基本矩阵随机采样鲁棒估计   总被引：2，自引：0，他引：2  

高晟丽  陈杰  李海滨 《海洋测绘》2006,26(3):31-33,38

基本矩阵的估算可以分为线性算法、非线性优化迭代算法、鲁棒估计算法三大类,而以鲁棒估计效率、效果最为突出,但是实现比较复杂。本文通过数码相机获取的两张未标定照片,采样互相关系数法和RANSAC算法,在MATLAB中实现了基本矩阵的自动拟合,实验表明拟合精度较高、速度快,为下一步三维场景的自动重建和量测奠定了基础。  相似文献